LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Removal And Installation >> Fluid Cooler System >> VQ37VHR (2WD) >> VQ37VHR (2WD): Removal and Installation >> Removal

VQ37VHR (2WD): Removal and Installation: Removal

  1. Remove air cleaner case (LH). Refer to "EXPLODED VIEW ".
  2. Remove engine under cover and engine under cover rear with a power tool. Refer to "EXPLODED VIEW ".
  3. Remove A/T fluid cooler hose A and A/T fluid cooler hose B.
  4. Remove exhaust mounting bracket with power tool. Refer to "VQ37VHR: EXPLODED VIEW ".
  5. Remove A/T fluid cooler tube mounting bolts and bracket.
  6. Remove suspension member stay. Refer to "EXPLODED VIEW ".
  7. Remove the clips and bands fixing two A/T fluid cooler tubes.
  8. Remove the A/T fluid cooler tubes one at a time from the vehicle.
    CAUTION: Be careful not to bend A/T fluid cooler tubes.
    NOTE: Cap or plug openings to prevent fluid from spilling.
scientia non olet · About LEMON Manuals