Component Function Check

CHECK COMBINATION METER OUTPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.

Fuel gauge indication position	Reference value of data monitor [L]
1	Approx. 61.1
3/4	Approx. 51.9
1/2	Approx. 39.7
1/4	Approx. 22.6
0	Approx. 10.3

Does monitor value match fuel gauge reading?

YES: INSPECTION END

NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".