LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> M35h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel >> Precaution >> Precautions >> Precaution Necessary for Steering Wheel Rotation after 12V Battery Disconnect >> Operation Procedure

Operation Procedure

  1. Connect both 12V battery cables.
    NOTE: Supply power using jumper cables if 12V battery is discharged.
  2. Turn the ignition switch to ACC position. (At this time, the steering lock will be released.)
  3. Disconnect both 12V battery cables. The steering lock will remain released with both 12V battery cables disconnected and the steering wheel can be turned.
  4. Perform the necessary repair operation.
  5. When the repair work is completed, re-connect both 12V battery cables. With the brake pedal released, turn the ignition switch from ACC position to ON position, then to LOCK position. (The steering wheel will lock when the ignition switch is turned to LOCK position.)
  6. Perform self-diagnosis check of all control units using CONSULT.
scientia non olet · About LEMON Manuals