LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 217 (Engine Control System (VK50VE) - FX50 - DTC U0101, U0113, U1003, U1001, U1024, & P006A Through P0133 / P0153) >> DTC P0112, P0113: IAT Sensor >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2011 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK INTAKE AIR TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect mass air flow sensor (bank 1) harness connector.
    3. Check resistance between mass air flow sensor (bank 1) terminals as per the following.
      RESISTANCE REFERENCE CHART

      Terminals Condition Resistance (kΩ)
      1 and 2 Temperature [°C (°F)] 25 (77) 1.800 - 2.200

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace mass air flow sensor (bank 1) (with intake air temperature sensor). Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals