ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ECM) : Special Repair Requirement
WARNING: This page is about a different car, the 2011 Infiniti FX50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
Refer to "ECM RE-COMMUNICATING FUNCTION : SPECIAL REPAIR REQUIREMENT ".
GO TO 2.
- PERFORM VIN REGISTRATION
Refer to "VIN REGISTRATION : SPECIAL REPAIR REQUIREMENT ".
GO TO 3.
- PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to "ACCELERATOR PEDAL RELEASED POSITION LEARNING : SPECIAL REPAIR REQUIREMENT ".
GO TO 4.
- PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to "THROTTLE VALVE CLOSED POSITION LEARNING : SPECIAL REPAIR REQUIREMENT ".
GO TO 5.
- PERFORM IDLE AIR VOLUME LEARNING
Refer to "IDLE AIR VOLUME LEARNING : SPECIAL REPAIR REQUIREMENT ".
END