LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Engine Control System (VQ35HR) - FX35 - DTC U0101, U0164, U1001, & P0011 Through P0133 / P0153) >> DTC P0014, P0024: EVT Control >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC P0014 or P0024 is displayed with DTC P0078, P0084 first perform trouble diagnosis for DTC P0078, P0084. Refer to "DTC LOGIC ".
  • If DTC P0014 or P0024 is displayed with DTC P1078, P1084 first perform trouble diagnosis for DTC P1078, P1084. Refer to "DTC LOGIC ".
DTC DETECTION CONDITION CHART

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P0014 Exhaust valve timing (EVT) control performance (bank 1) There is a gap between angle of target and phase-control angle degree.
  • Crankshaft position sensor
  • Camshaft position sensor
  • EVT control position sensor
  • EVT control magnet retarder
  • Accumulation of debris to the signal pick-up portion of the camshaft
  • Timing chain installation
  • EVT control pulley assembly
P0024 Exhaust valve timing (EVT) control performance (bank 2)