DTC Index
UNIFIED METER AND A/C AMP DTC INDEX
| Display contents of CONSULT | Time | Diagnostic item is detected when... |
|---|---|---|
| CAN COMM CIRCUIT [U1000] | CRNT, 1 - 39 | When unified meter and A/C amp. is not transmitting or receiving CAN communication signal for 2 seconds or more. |
| CONTROL UNIT (CAN) [U1010] | CRNT, 1 - 39 | When detecting error during the initial diagnosis of CAN controller of unified meter and A/C amp. |
| COMM ERROR 1 [B2201] | CRNT, 1 - 39 | If a communication error is present in the communication line between unified meter and A/C amp. and combination meter for 2 seconds or more. |
| COMM ERROR 2 [B2202] | CRNT, 1 - 39 | If a communication error is present in the communication line between unified meter and A/C amp. and combination meter for 2 seconds or more. |
| VEHICLE SPEED [B2205] | CRNT, 1 - 39 | The abnormal vehicle speed signal is input from ABS actuator and electric unit (control unit) for 2 seconds or more. |
| ENGINE SPEED [B2267] | CRNT, 1 - 39 | If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. |
| WATER TEMP [B2268] | CRNT, 1 - 39 | If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. |