LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> FX35 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Trip A/B Reset Switch Signal Circuit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK TRIP A/B RESET SWITCH INPUT SIGNAL
    1. Turn the ignition switch ON.
    2. Check voltage between the combination meter harness connector terminals.
    Combination meter Condition Voltage
    Connector Terminal
    (+) (-)
    M53 38 16 When trip A/B reset switch is pressed 0 V
    Other than the above 5 V

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: GO TO 2.

  2. CHECK TRIP A/B RESET SWITCH SIGNAL CIRCUIT
    1. Turn the ignition switch OFF.
    2. Disconnect the combination meter and meter control switch connectors.
    3. Check continuity between combination meter harness connector and trip A/B reset switch harness connector.
      Combination meter Trip A/B reset switch Continuity
      Connector Terminal Connector Terminal
      M53 38 M56 1 Existed
      16 2 Existed
    4. Check continuity between combination meter harness connector and ground.
    Combination meter Ground Continuity
    Connector Terminal
    M53 38 Not existed
    16 Not existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Repair harness or connector.

scientia non olet · About LEMON Manuals