LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (VDC/TCS/Abs) >> DTC/Circuit Diagnosis >> Parking Brake Switch >> Component Inspection

Component Inspection

  1. CHECK PARKING BRAKE SWITCH
    1. Turn the ignition switch OFF.
    2. Disconnect parking brake switch connector.
    3. Check the continuity between parking brake switch connector and ground.
      Parking brake switch - Condition Continuity
      Connector Terminal
      E107 1 Ground When the parking brake switch is operated. Existed
      When the parking brake switch is not operated. Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace parking brake switch.

scientia non olet · About LEMON Manuals