Data Monitor
DISPLAY ITEM LIST
| X: Applicable | ||
|---|---|---|
| Display item [Unit] | MAIN SIGNALS | Description |
| SPEED METER [km/h] or [mph] |
X | Value of vehicle speed signal received from ABS actuator and electric unit (control unit) with CAN communication line.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| SPEED OUTPUT [km/h] or [mph] |
X | Vehicle speed signal value transmitted to other units with CAN communication line.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| ODO OUTPUT [km/h] or [mph] |
Odometer signal value transmitted to other units with CAN communication line. | |
| TACHO METER [RPM] |
X | Value of the engine speed signal received from ECM with CAN communication line.
NOTE:
8191.875 is displayed when the malfunction signal is received.
|
| FUEL METER [L] |
X | Fuel level indicated on combination meter. |
| W TEMP METER [°C] or [°F] |
X | Value of engine coolant temperature signal received from ECM with CAN communication line.
NOTE:
215 is displayed when the malfunction signal is input.
|
| FUEL CAP W/L [On/Off] |
Status of fuel filler cap warning display detected from fuel filler cap warning display signal received from ECM via CAN communication. | |
| ABS W/L [On/Off] |
Status of ABS warning lamp judged from ABS warning lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. | |
| VDC/TCS IND [On/Off] |
Status of VDC OFF indicator lamp judged from VDC OFF indicator lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. | |
| SLIP IND [On/Off] |
Status of VDC warning lamp judged from VDC warning lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line. | |
| BRAKE W/L [On/Off] |
Status of brake warning lamp judged from brake warning lamp signal received from ABS actuator and electric unit (control unit) with CAN communication line.
NOTE:
Displays "Off" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
|
|
| DOOR W/L [On/Off] |
Status of door warning judged from door switch signal received from BCM with CAN communication line. | |
| HI-BEAM IND [On/Off] |
Status of high beam indicator lamp judged from high beam request signal received from BCM with CAN communication line. | |
| TURN IND [On/Off] |
Status of turn indicator lamp judged from turn indicator signal received from BCM with CAN communication line. | |
| FR FOG IND [Off] |
Status of front fog light indicator lamp detected from front fog light request signal is received from BCM via CAN communication. | |
| RR FOG IND [Off] |
This item is displayed, but cannot be monitored. | |
| LIGHT IND [On/Off] |
Status of tail lamp indicator lamp judged from position light request signal received from BCM with CAN communication line. | |
| OIL W/L [On/Off] |
Status of oil pressure warning lamp judged from oil pressure switch signal received from IPDM E/R with CAN communication line. | |
| MIL [On/Off] |
Status of malfunction indicator lamp judged from malfunctioning indicator lamp signal received from ECM with CAN communication line. | |
| GLOW IND [Off] |
This item is displayed, but cannot be monitored. | |
| C-ENG2 W/L [Off] |
This item is displayed, but cannot be monitored. | |
| CRUISE IND [On/Off] |
Status of CRUISE indicator judged from ASCD status signal received from ECM with CAN communication line. | |
| SET IND [On/Off] |
|
|
| CRUISE W/L [On/Off] |
Status of CRUISE warning lamp judged from ICC warning lamp signal received from ICC sensor integrated unit with CAN communication line. | |
| BA W/L [Off] |
Status of IBA OFF indicator lamp judged from IBA OFF indicator lamp signal received ICC sensor integrated unit with CAN communication line. | |
| ATC/T-AMT W/L [On/Off] |
Status of A/T check warning lamp judged from A/T check indicator signal received from TCM with CAN communication line. | |
| 4WD W/L [On/Off] |
Status of AWD warning lamp judged from AWD warning lamp signal received from AWD control unit with CAN communication line. | |
| 4WD LOCK IND [Off] |
This item is displayed, but cannot be monitored. | |
| FUEL W/L [On/Off] |
Low-fuel warning status judged by the identified fuel level. | |
| WASHER W/L [On/Off] |
Status of washer warning judged from washer level switch input to combination meter. | |
| AIR PRES W/L [On/Off] |
Status of low tire pressure warning lamp judged from TPMS malfunction warning lamp signal received from BCM with CAN communication line. | |
| KEY G/Y W/L [On/Off] |
Status of key warning lamp (G/Y) judged from key warning signal received from BCM with CAN communication line. | |
| AFS OFF IND [On/Off] |
Status of AFS OFF indicator lamp judged from AFS OFF indicator lamp signal received from AFS control unit with CAN communication line. | |
| 4WAS/RAS W/L [Off] |
This item is displayed, but cannot be monitored. | |
| DDS W/L [Off] |
This item is displayed, but cannot be monitored. | |
| LANE W/L [On/Off] |
Status of lane departure warning lamp judged from lane departure warning lamp signal received from lane camera unit with CAN communication line. | |
| LDP IND [On/Off] |
Status of LDP ON indicator lamp judged from LDP ON indicator lamp signal received from lane camera unit with CAN communication line. | |
| DCA IND [On/Off] |
Status of DCA switch indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| BSW W/L [On/Off] |
Status of BSW warning lamp judged from BSW warning lamp signal received from BSW control module with CAN communication line. | |
| LCD [B&P N, B&P I, ID NG, ROTAT, SFT P, INSRT, BATT, NO KY, OUTKY, LK WN] |
Displays status of Intelligent Key system warning judged from meter display signal received from BCM with CAN communication line. | |
| ACC TARGET [On/Off] |
Status of vehicle ahead detection indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| ACC DISTANCE [Off, SHORT, MID, LONG] |
Status of set distance indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| ACC OWN VHL [On/Off] |
Status of own vehicle indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| ACC SET SPEED | Status of set vehicle speed indicator judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| ACC UNIT [On/Off] |
Status of display unit judged from meter display signal received from ICC sensor integrated unit with CAN communication line. | |
| SHIFT IND [P, R, N, D, L, M1, M2, M3, M4, M5, M6, M7] |
Status of shift position indicator judged from shift position signal and manual mode indicator signal received from TCM with CAN communication line. | |
| O/D OFF SW [Off] |
This item is displayed, but cannot be monitored. | |
| AT S MODE SW [On/Off] |
Status of snow mode switch. | |
| AT P MODE SW [Off] |
This item is displayed, but cannot be monitored. | |
| M RANGE SW [On/Off] |
Status of manual mode switch. | |
| NM RANGE SW [On/Off] |
Status of non-manual mode switch. | |
| AT SFT UP SW [On/Off] |
Status of manual mode shift up switch. | |
| AT SFT DWN SW [On/Off] |
Status of manual mode shift down switch. | |
| ST SFT UP SW [Off] |
This item is displayed, but cannot be monitored. | |
| ST SFT DWN SW [Off] |
This item is displayed, but cannot be monitored. | |
| COMP F/B SIG [On/Off] |
A/C compressor activation condition that ECM judges according to the water temperature and the acceleration degree. | |
| 4WD LOCK SW [Off] |
This item is displayed, but cannot be monitored. | |
| PKB SW [On/Off] |
Status of parking brake switch. | |
| BUCKLE SW [On/Off] |
Status of seat belt buckle switch (driver side). | |
| BRAKE OIL SW [On/Off] |
Status of brake fluid level switch. | |
| DISTANCE [km] |
Value of possible driving distance calculated by unified meter and A/C amp. | |
| OUTSIDE TEMP [°C] or [°F] |
Ambient air temperature value converted from ambient sensor signal received from ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
|
|
| FUEL LOW SIG [On/Off] |
Status of fuel level low warning signal to output to AV control unit with CAN communication line. | |
| BUZZER [On/Off] |
X | Buzzer status (in the combination meter) is judged with the buzzer output signal received from each unit with CAN communication line and the warning output condition of the combination meter. |
NOTE:
Some items are not available according to vehicle specification.