LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2012 >> EX35 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Washer Level Switch Signal Circuit >> Component Inspection

Component Inspection

  1. CHECK WASHER LEVEL SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect washer level switch connector.
    3. Check washer level switch.
      Terminal Condition Continuity
      1 2 Washer fluid level is low (washer level switch ON) Existed
      Washer fluid level is normal (washer level switch OFF) Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace washer level switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals