Self Diagnostic Result

WARNING: This page is about a different variant/trim than selected.

Refer to "DTC INDEX ".

When "0" is displayed on self-diagnosis result.

The system is presently malfunctioning.

When except "0" is displayed on self-diagnosis result.

System malfunction in the past is detected, but the system is presently normal.
NOTE: Each time when ignition switch is turned OFF to ON, numerical number increases in 1→2→3...110→111. When the operation number of times exceeds 111, the number do not increase and "111" is displayed until

self-diagnosis is erased*.

*: For "U1000" and "U1010", the maximum value is "39".