LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (ATX90A)) >> Removal And Installation >> Transfer Fluid Temperature Sensor >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Drain transfer fluid. Refer to "DRAINING ".
  2. Disconnect the transfer fluid temperature sensor connector.
  3. Remove the transfer fluid temperature sensor.
  4. Perform inspection after removal. Refer to "INSPECTION ".
scientia non olet · About LEMON Manuals