LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (ATX90A)) >> Removal And Installation >> 4WD Mode Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: 4WD shift switch is integrated in 4WD switch assembly.
  1. Remove console finisher assembly from center console assembly. Refer to "REMOVAL AND INSTALLATION "
  2. Disconnect 4WD switch assembly harness connector.
  3. Press 4WD switch assembly fixing pawls, and remove 4WD switch assembly from console finisher assembly.
scientia non olet · About LEMON Manuals