LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (ATX90A)) >> DTC/Circuit Diagnosis >> DTC P182A: Transfer Hi-Lo Position Sensor >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. DTC REPRODUCTION PROCEDURE

    With CONSULT-III 

    1. Start the engine.
      CAUTION: Never drive the vehicle.
    2. Turn the 4WD shift switch AUTO=>4H=>4LO=>4H=>AUTO.
    3. Drive at 20 km/h (12MPH) or more for 1 minute or more.
    4. Perform self-diagnosis for "ALL MODE AWD/4WD".

      Is DTC "P182A" detected? 

      YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About LEMON Manuals