LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> QX56 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case (ATX90A)) >> DTC/Circuit Diagnosis >> DTC P1826: Transfer Fluid Temperature >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK TRANSFER FLUID TEMPERATURE SENSOR
    1. Turn the ignition switch OFF.
    2. Disconnect transfer fluid temperature sensor harness connector.
    3. Check the resistance between transfer control fluid temperature sensor connector terminals.
      RESISTANCE SPECIFICATION

      Transfer fluid temperature sensor Condition Resistance
      Terminal
      2 1 20°C (68°F) Approx. 2.5 kΩ
      80°C (176°F) Approx. 0.3 kΩ

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace transfer fluid temperature sensor. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals