Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT
Remove the fuel level sensor unit. Refer to "REMOVAL AND INSTALLATION ".

GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT

Check the resistance between fuel level sensor unit and fuel pump.

RESISTANCE SPECIFICATION

Terminals

Condition

Resistance (Ω) (Approx.)

Height [mm (in)]

Fuel level sensor unit

Full⁽¹⁾ (A)

46.0

282 (11.10)

Empty⁽¹⁾ (B)

278.0

29 (1.14)

⁽¹⁾	When float rod is contact with stopper.

Fig 1: Checking Fuel Level Sensor Unit

Courtesy of NISSAN MOTOR CO., U.S.A.

Is inspection result OK?

YES: INSPECTION END

NO: Replace fuel level sensor unit and fuel pump. Refer to "REMOVAL AND INSTALLATION ".