LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> M56 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) -- M37/M56 >> DTC/Circuit Diagnosis >> Parking Brake Switch >> Component Inspection

Component Inspection

  1. CHECK PARKING BRAKE SWITCH
    1. Turn the ignition switch OFF.
    2. Disconnect parking brake switch harness connector.
    3. Check continuity between parking brake switch terminal and ground.
      CONTINUITY REFERENCE CHART

      Parking brake switch - Condition Continuity
      Terminal
      1 Ground When parking brake switch is pressed Existed
      When parking brake switch is released Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace parking brake switch. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About LEMON Manuals