Diagnosis Procedure

1. Start engine.
2. Check the operation of the brake warning lamp when operating the parking brake.
   CONDITION REFERENCE
   
   

   Condition	Warning lamp status
   Parking brake applied	ON
   Parking brake released	OFF

   Is the inspection result normal? 

   YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

   NO: GO TO 2.

1. Turn ignition switch OFF.
2. Check the parking brake switch signal circuit. Refer to "DIAGNOSIS PROCEDURE ".

   Is the inspection result normal? 

   YES: GO TO 3.

   NO: Repair harness or connector.

Perform a unit check for the parking brake switch. Refer to "COMPONENT INSPECTION ".

Is the inspection result normal? 

YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

NO: Replace parking brake switch. Refer to "EXPLODED VIEW ".