DTC Index
DTC INDEX
| Display contents of CONSULT-III | Diagnostic item is detected when... | Refer to |
|---|---|---|
| CAN COMM CIRCUIT [U1000] | When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. | "DIAGNOSIS PROCEDURE " |
| CONTROL UNIT (CAN) [U1010] | When detecting error during the initial diagnosis of the CAN controller of combination meter. | "DIAGNOSIS PROCEDURE " |
| VEHICLE SPEED [B2205] | The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. | "DIAGNOSIS PROCEDURE " |
| ENGINE SPEED [B2267] | If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. | "DIAGNOSIS PROCEDURE " |
| WATER TEMP [B2268] | If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. | "DIAGNOSIS PROCEDURE " |