Data Monitor
Display Item List
SIGNAL REFERENCE
| X: Applicable | ||
|---|---|---|
| Display item [Unit] | MAIN SIGNALS | Description |
| SPEED METER [km/h] | X | Value of vehicle speed signal received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| SPEED OUTPUT [km/h] | X | Vehicle speed signal value transmitted to other units via CAN communication.
NOTE:
655.35 is displayed when the malfunction signal is received.
|
| ODO OUTPUT [km/h or mph] | Odometer signal value transmitted to other units via CAN communication. | |
| TACHO METER [RPM] | X | Value of the engine speed signal received from ECM via CAN communication.
NOTE:
8191.875 is displayed when the malfunction signal is received.
|
| FUEL METER [L] | X | Fuel level indicated on combination meter. |
| W TEMP METER [°C] | X | Value of engine coolant temperature signal is received from ECM via CAN communication.
NOTE:
215 is displayed when the malfunction signal is input.
|
| ABS W/L [On/Off] | Status of ABS warning lamp detected from ABS warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |
| VDC/TCS IND [On/Off] | Status of VDC OFF indicator lamp detected from VDC OFF indicator lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication. | |
| SLIP IND [On/Off] | Status of VDC warning lamp detected from VDC warning lamp signal received from ABS actuator and electric unit (control unit) via CAN communication. | |
| BRAKE W/L [On/Off] | Status of brake warning lamp detected from brake warning lamp signal is received from ABS actuator and electric unit (control unit) via CAN communication.
NOTE:
Displays "Off" if the brake warning lamp is illuminated when the valve check starts, the parking brake switch is turned ON or the brake fluid level switch is turned ON.
|
|
| DOOR W/L [On/Off] | Status of door open warning detected from door switch signal received from BCM via CAN communication. | |
| TRUNK/GLAS-H [On/Off] | Status of trunk open warning detected from trunk switch signal received from BCM via CAN communication. | |
| HI-BEAM IND [On/Off] | Status of high beam indicator lamp detected from high beam request signal is received from BCM via CAN communication. | |
| TURN IND [On/Off] | Status of turn indicator lamp detected from turn indicator signal is received from BCM via CAN communication. | |
| FR FOG IND [On/Off] | Status of front fog light indicator lamp detected from front fog light request signal is received from BCM via CAN communication. | |
| LIGHT IND [On/Off] | Status of light indicator lamp detected from position light request signal is received from BCM via CAN communication. | |
| OIL W/L [On/Off] |
|
|
| MIL [On/Off] | Status of malfunction indicator lamp detected from malfunctioning indicator lamp signal is received from ECM via CAN communication. | |
| GLOW IND [Off] | This item is displayed, but cannot be monitored. | |
| CRUISE IND [On/Off] |
|
|
| SET IND [On/Off] |
|
|
| CRUISE W/L [On/Off] | Status of ICC warning lamp detected from ICC warning lamp signal is received from ADAS control unit via CAN communication. | |
| BA W/L [On/Off] | Status of IBA OFF indicator lamp judged from IBA OFF indicator lamp signal received from ADAS control unit with CAN communication line. | |
| ATC/T-AMT W/L [On/Off] | Status of A/T CHECK warning lamp judged from A/T CHECK indicator lamp signal received from TCM with CAN communication line. | |
| 4WD W/L [On/Off] | Status of AWD warning lamp judged from AWD warning lamp signal received from AWD control unit with CAN communication line. | |
| FUEL W/L [On/Off] | Low fuel warning status detected by the identified fuel level. | |
| WASHER W/L [On/Off] | Status of low washer fluid warning judged from washer level switch input to combination meter. | |
| AIR PRES W/L [On/Off] | Status of low tire pressure warning lamp judged from low tire pressure warning lamp signal received from BCM with CAN communication line. | |
| KEY G/Y W/L [On/Off] | Status of Intelligent Key system malfunction detected from Intelligent Key warning display signal is received from BCM via CAN communication. | |
| AFS OFF IND [On/Off] | Status of AFS OFF indicator lamp judged from AFS OFF indicator lamp signal received from AFS control unit with CAN communication line. | |
| 4WAS/RAS W/L [On/Off] | Status of 4WAS warning lamp judged from 4WAS warning lamp signal received from 4WAS main control unit with CAN communication line. | |
| LANE W/L [On/Off] | Status of lane departure warning lamp judged from lane departure warning lamp signal received from ADAS control unit with CAN communication line. | |
| LDP IND [On/Off] | Status of LDP ON indicator lamp judged from LDP ON indicator lamp signal received from ADAS control unit with CAN communication line. | |
| LCD [B&P N, B&P I, ID NG, ROTAT, SFT P, INSRT, BATT, NO KY, OUTKY, LK WN] | Displays status of Intelligent Key system warning judged from meter display signal received from BCM with CAN communication line. | |
| ACC TARGET [On/Off] | Status of vehicle ahead detection indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |
| ACC DISTANCE [Off, Short, Middle, Long] | Status of set distance indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |
| ACC OWN VHL [On/Off] | Status of own vehicle indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |
| ACC SET SPEED [On/Off] | Status of set vehicle speed indicator judged from meter display signal received from ADAS control unit with CAN communication line. | |
| ACC UNIT [km/h/Off] | Status of display unit judged from meter display signal received from ADAS control unit with CAN communication line. | |
| SHIFT IND [P, R, N, D, M1, M2, M3, M4, M5, M6, M7] | Status of shift position indicator judged from shift position signal received from TCM with CAN communication line. | |
| ECO DRIVE IND G [On/Off] | Status of ECO drive indicator (green) judged from ECO drive indicator control signal received from ECM with CAN communication line. | |
| ECO DRIVE IND O [On/Off] | Status of ECO drive indicator (orange) judged from ECO drive indicator control signal received from ECM with CAN communication line. | |
| BSW IND [On/Off] | Status of BSI ON indicator (green) judged from BSI ON indicator signal received from ADAS control unit with CAN communication line. | |
| BSW W/L [On/Off] | Status of BSW/BSI warning lamp (yellow) judged from BSW/BSI warning lamp signal received from ADAS control unit with CAN communication line. | |
| DRIVE MODE STATS [SNOW, SN-EC, ECO, EC-ST, STD, ST-SP, SPORT, ERROR] | Status of drive mode select switch. | |
| M RANGE SW [On/Off] | Status of manual mode switch. | |
| NM RANGE SW [On/Off] | Status of non-manual mode switch. | |
| AT SFT UP SW [On/Off] | Status of manual mode shift up switch. | |
| AT SFT DWN SW [On/Off] | Status of manual mode shift down switch. | |
| ST SFT UP SW [On/Off] | Status of paddle shifter shift up switch. | |
| ST SFT DWN SW [On/Off] | Status of paddle shifter shift down switch. | |
| PKB SW [On/Off] | Status of parking brake switch. | |
| BUCKLE SW [On/Off] | Status of seat belt buckle switch (driver side). | |
| BRAKE OIL SW [On/Off] | Status of brake fluid level switch. | |
| ENTER SW [On/Off] | Status of (ENTER) switch. | |
| SELECT SW [On/Off] | Status of (SELECT) switch. | |
| DISTANCE [km] | Value of distance to empty calculated by combination meter. | |
| OUTSIDE TEMP [°C or °F] | Ambient temperature value converted from ambient sensor signal received from ambient sensor.
NOTE:
This may not match with the temperature value indicated on the information display. (Because the information display value is a corrected value from the ambient sensor input value.)
|
|
| FUEL LOW SIG [On/Off] | Status of fuel level low warning signal to output to AV control unit via CAN communication. | |
| BUZZER [On/Off] | X | Buzzer status (in the combination meter) is detected from the buzzer output signal received from each unit via CAN communication and the warning output condition of the combination meter. |
NOTE:
Some items are not available according to vehicle specification.