Component Function Check

CHECK COMBINATION METER OUTPUT SIGNAL

Select the "Data Monitor" for the "METER/M&A" and compare the "FUEL METER" monitor value with the fuel gauge reading on the combination meter.

FUEL GAUGE REFERENCE

Fuel gauge indication position	Reference value of data monitor [L]
1	Approx. 72.8
3/4	Approx. 60.0
1/2	Approx. 41.2
1/4	Approx. 23.4
0	Approx. 11.1

Does monitor value match fuel gauge reading?

YES: INSPECTION END

NO: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".