LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 66 (Transfer Case -- G37 Coupe) >> Unit Disassembly And Assembly >> Front Drive Shaft And Drive Chain >> Disassembly

Front Drive Shaft And Drive Chain: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Separate front case and rear case. Refer to "DISASSEMBLY ".
  2. Remove drive chain and front drive shaft.
    CAUTION: Never use tools. Always remove by hand.
  3. Remove front drive shaft rear bearing with the drift (A) and replacer (B).
    Fig 1: Removing Front Drive Shaft Rear Bearing With Drift And Replacer
    G07170687Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove front drive shaft front bearing with the drift (A) and replacer (B).
  5. Remove plug from front drive shaft.
Fig 2: Removing Front Drive Shaft Front Bearing With Drift And Replacer
G07170688Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals