LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 66 (Transfer Case -- G37 Coupe) >> Precaution >> Precautions >> Precautions Necessary for Steering Wheel Rotation After Battery Disconnection >> Operation Procedure

Operation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Connect both battery cables.
    NOTE: Supply power using jumper cables if battery is discharged.
  2. Turn the ignition switch to ACC position. (At this time, the steering lock will be released.)
  3. Disconnect both battery cables. The steering lock will remain released with both battery cables disconnected and the steering wheel can be turned.
  4. Perform the necessary repair operation.
  5. When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn the ignition switch from ACC position to ON position, then to LOCK position. (The steering wheel will lock when the ignition switch is turned to LOCK position.)
  6. Perform self-diagnosis check of all control units using CONSULT.