LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 66 (Transfer Case -- G37 Coupe) >> DTC/Circuit Diagnosis >> DTC P1826: Transfer Fluid Temperature >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK TRANSFER FLUID TEMPERATURE SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect AWD solenoid harness connector.
    3. Check resistance between AWD solenoid harness connector terminals.
    TERMINALS RESISTANCE REFERENCE CHART

    AWD solenoid Condition Resistance (Approx.)
    Terminal
    6 7 20°C (68°F) 2.5 kΩ
    80°C (176°F) 0.3 kΩ

    Is inspection result normal? 

    YES: INSPECTION END

    NO: Transfer fluid temperature sensor is malfunctioning. Replace electric controlled coupling. Refer to "EXPLODED VIEW ".

scientia non olet · About LEMON Manuals