AWD : Removal and Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Note the following, and install in the reverse order of removal.

CAUTION:

When installing air breather hose, be careful not to be crushed or blocked by folding or bending the hose.
When inserting air breather hose to air breather tube, be sure to insert it fully until its end reaches the radius curve end.
When inserting air breather hose to air breather vent (for A/T) (1), be sure to insert it fully until its end reaches the radius curve end.

Fig 1: Locating Air Breather Vent For A/T And Transfer
Courtesy of NISSAN MOTOR CO., U.S.A.
Install air breather hose to air breather vent (for A/T) so that the paint mark is facing upward.
Ensure clips are securely installed to brackets when installing air breather hose to brackets.