WITH ICC : Component Inspection (Shift Lock Relay)

WARNING: This page is about a different variant/trim than selected.

CHECK SHIFT LOCK RELAY

Check continuity between shift lock relay terminals.

CAUTION: Connect the fuse between the terminals when applying the voltage.

CONTINUITY REFERENCE CHART

Shift lock relay connector			Condition	Continuity
Connector	Terminal		Condition	Continuity
E52	3	5	Apply 12 V direct current between terminals 1 and 2.	Existed
E52	3	5	OFF	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace shift lock relay.