Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC OF ECM
With CONSULT-III
- Turn ignition switch ON.
- Perform "Self Diagnostic Results" in "ENGINE".
Is any DTC detected?
YES: Check DTC detected item. Refer to "DTC INDEX ".
NO: Go to 2.
- CHECK DTC OF TCM
With CONSULT-III
Perform "Self Diagnostic Results" in "TRANSMISSION".
Is any DTC other than "P1705" detected?
YES: Check DTC detected item. Refer to "DTC INDEX ".
NO: Go to 3.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
Is the inspection result normal?
YES: Replace control valve & TCM. Refer to "EXPLODED VIEW ".
NO: Repair or replace damaged parts.