DTC P0705: Transmission Range Switch A: Description
WARNING: This page is about a different variant/trim than selected.
- The transmission range switch incorporates four contact switches. Each contact switch transmits an ON/OFF signal to the TCM.
- The TCM judges a select lever position from a combination of ON/OFF signals transmitted from each contact switch.
TRANSMISSION RANGE SWITCH REFERENCE CHART
| Select lever position | Transmission range switch | |||
|---|---|---|---|---|
| SW1 | SW2 | SW3 | SW4 | |
| P | OFF | OFF | OFF | OFF |
| R | ON | OFF | OFF | ON |
| N | ON | ON | OFF | OFF |
| D and M | ON | ON | ON | ON |