Extended Storage Switch (If Equipped)
The following switch may be mounted on the fuse block (Junction Box) for transportation and storage.
- Remove the extended storage switch when replacing the fuse of extended storage switch.
- Remove the extended storage switch if it causes the interference when the fuse or the other fuses is checked.
How To Extended Storage Switch ON/OFF
CAUTION:
- Turn the ignition switch OFF when operating the extended storage switch.
- Under normal conditions, keep the extended storage switch in ON state. Never operate the extended storage switch except when necessary.
- Type A
Courtesy of NISSAN MOTOR CO., U.S.A.
- To turn the extended storage switch OFF, pull it up in (A) direction as shown in illustration.
- To turn the extended storage switch ON, press it in (B) direction as shown in illustration.
- Type B
- To turn the extended storage switch OFF, hold (A) of the switch and pull up in (B) direction as shown in illustration.
- To turn the extended storage switch ON, press it in (C) direction as shown in illustration.
How To Remove Extended Storage Switch
Type A
- Turn the ignition switch OFF.
- Turn the extended storage switch OFF.
- Press pawl (A) and tilt to disengage the extended storage switch. Press pawl (B) and tilt to remove the extended storage switch.
NOTE:
- Extended storage switch and fuse are removed together. Remove fuse from extended storage switch, if necessary.
- Extended storage switch is for transportation and storage. Reinstallation is not required after the removal.
Type B
- Turn the ignition switch OFF.
- Turn the extended storage switch OFF.
- Hold (A) and pull up the extended storage switch hard in (B) direction.
NOTE:
- Extended storage switch and fuse may be removed together. Remove fuse from extended storage switch, if necessary.
- Extended storage switch is for transportation and storage. Reinstallation is not required after the removal.