LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 IPL, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock -- G37 Coupe >> DTC/Circuit Diagnosis >> Buzzer (Combination Meter) >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Use CONSULT-III to perform Active Test ("INSIDE BUZZER").
    2. Touch "TAKE OUT", "KNOB" or "KEY" to check that it works normally.

      Is the inspection result normal? 

      Yes: Warning buzzer into combination meter is OK.

      No: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals