Component Description

COMPONENT DESCRIPTION CHART

Part	Description
BCM	Detects each switch condition by the combination switch reading function. Judges the outside brightness from the optical sensor signal. Judges the OFF timing according to the vehicle condition. Judges the ON/OFF status of the exterior lamp and each illumination according to the outside brightness and the vehicle condition. Requests ON/OFF of each relay to IPDM E/R (with CAN communication).
IPDM E/R	Controls the integrated relay, and supplies voltage to the load according to the request from BCM (with CAN communication).
Combination switch (Lighting & turn signal switch)	Refer to "SYSTEM DIAGRAM ".
Optical sensor	Refer to "DESCRIPTION ".