Component Function Check

IPDM E/R AUTO ACTIVE TEST

1. Start IPDM E/R auto active test. Refer to "DIAGNOSIS DESCRIPTION ".
2. Check that the headlamp switches to the high beam.

CONSULT-III ACTIVE TEST

1. Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2. With operating the test items, check that the headlamp switches to the high beam.

   Hi : Headlamp switches to the high beam. 

   Off : Headlamp OFF 

   NOTE: HI/LO is repeated 1 second each when using the IPDM E/R auto active test.

   Does the headlamp switch to the high beam? 

   YES: Headlamp (HI) circuit is normal.

   NO: Refer to "DIAGNOSIS PROCEDURE ".