Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

Align matching mark to install propeller shaft assembly to final drive companion flange.
Perform inspection after installation. Refer to "INSPECTION ".

CAUTION:

Never damage the transfer front oil seal.
Wrap power steering piping interference area with shop cloth or equivalent to protect power steering piping from damage.

Fig 1: Aligning Matching Mark To Install Propeller Shaft Assembly To Final Drive Companion Flange
Courtesy of NISSAN MOTOR CO., U.S.A.
Wrap transmission interference area (A) with shop cloth or equivalent to protect propeller shaft from damage.

Fig 2: Wrapping Transmission Interference Area (A) With Shop Cloth To Protect Propeller Shaft From Damage
Courtesy of NISSAN MOTOR CO., U.S.A.
Never reuse O-ring.
Apply multi-purpose grease onto O-ring.