LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator -- G37 Convertible >> DTC/Circuit Diagnosis >> Power Supply And Ground Circuit >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Diagnosis Procedure

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) : Diagnosis Procedure

  1. CHECK FUSES AND FUSIBLE LINK

    Check that the following IPDM E/R fuses or fusible links are not blown.

    FUSES AND FUSIBLE LINK REFERENCE CHART

    Signal name Fuses and fusible link No.
    Battery power supply C
    50
    51

    Is the fuse fusing? 

    YES: Replace the blown fuse or fusible link after repairing the affected circuit if a fuse or fusible link is blown.

    NO: Go to 2.

  2. CHECK POWER SUPPLY CIRCUIT
    1. Turn the ignition switch OFF.
    2. Disconnect IPDM E/R connector.
    3. Check voltage between IPDM E/R harness connector and the ground.
      VOLTAGE REFERENCE CHART

      Terminals Voltage (Approx.)
      (+) (-)
      IPDM E/R
      Connector Terminal Ground
      E4 1 Battery voltage

      Is the measurement value normal? 

      YES: Go to 3.

      NO: Repair the harness or connector.

  3. CHECK GROUND CIRCUIT

    Check continuity between IPDM E/R harness connectors and the ground.

    CONTINUITY REFERENCE CHART

    IPDM E/R Ground Continuity
    Connector Terminal
    E5 12 Existed
    E6 41

    Does continuity exist? 

    YES: INSPECTION END

    NO: Repair the harness or connector.

scientia non olet · About LEMON Manuals