General Specifications
WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Applied model | AWD | |
|---|---|---|
| VQ37VHR | ||
| A/T | ||
| Propeller shaft model | 3F80A-1VL107 | |
| Number of joints | 3 | |
| Type of journal bearings (Non-disassembly type) | 1st joint | Shell type |
| 2nd joint | Shell type | |
| 3rd joint | Rebro joint type | |
| Coupling method with transfer | Flange type | |
| Coupling method with rear final drive | Rebro joint type | |
| Shaft length | 1st (Spider to spider) | 435 mm (17.13 in) |
| 2nd (Spider to rebro joint center) | 757 mm (29.80 in) | |
| Shaft outer diameter | 1st | 82.6 mm (3.252 in) |
| 2nd | 75.0 mm (2.953 in) | |