Propeller Shaft RUNOUT

WARNING: This page is about a different car, the 2011 Infiniti G37. However, it is still accessible from the selected car via links, so may be relevant.

Check propeller shaft runout at measuring points with a dial indicator. If runout exceeds specifications, replace propeller shaft assembly.

Propeller shaft runout: Refer to "PROPELLER SHAFT RUNOUT ".

Fig 1: Checking Propeller Shaft Runout At Measuring Points With Dial Indicator

Courtesy of NISSAN MOTOR CO., U.S.A.

Propeller shaft runout measuring point (Point "Δ").
← : Vehicle front

Fig 2: Identifying Propeller Shaft Runout Measuring Points Dimension

Courtesy of NISSAN MOTOR CO., U.S.A.

Dimension A: 162 mm (6.38 in)

B: 245 mm (9.65 in)

C: 185 mm (7.28 in)