LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> FX50 >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Removal And Installation >> EVAP Canister >> VQ35HR >> VQ35HR : Removal and Installation >> Removal

VQ35HR : Removal and Installation: Removal

  1. Lift up the vehicle.
  2. Remove EVAP canister fixing bolt.
  3. Remove EVAP canister.
NOTE: The EVAP canister vent control valve and EVAP canister system pressure sensor can be removed without removing the EVAP canister.
scientia non olet · About LEMON Manuals