ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description
Each function is reset to the following condition when the battery terminal is disconnected.
FUNCTION REFERENCE CHART
| Function | Condition | Procedure | ||
|---|---|---|---|---|
| Memory (Seat, steering, mirror) | Erased | Perform storing | ||
| Entry/exit assist | OFF | Perform initialization | ||
| Set slide amount(1) | ||||
| Intelligent Key interlock | Erased | Perform storing | ||
| Seat synchronization | OFF | - | ||
NOTE:
Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.
|
||||