LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> FX50 >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock - With Automatic Back Door -- FX35/FX50 >> DTC/Circuit Diagnosis >> Back Door Switch >> Component Inspection

Component Inspection

  1. CHECK BACK DOOR SWITCH
    1. Turn ignition switch OFF.
    2. Disconnect back door lock assembly connector.
    3. Check continuity between door switch terminals.
      CONTINUITY REFERENCE CHART

      Back door lock assembly Condition Continuity
      Terminal
      7 Ground part of door switch Door switch Pressed Not existed
      Released Existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace back door lock assembly.

scientia non olet · About LEMON Manuals