VK50VE : Removal and Installation: Installation

Note the following, and install in the reverse order of removal.

Align matching mark to install propeller shaft assembly to final drive companion flange.
Preform inspection after installation. Refer to "VK50VE : INSPECTION ".

CAUTION:

Never damage the transfer front oil seal.
Wrap power steering piping interference area with shop cloth or equivalent to protect power steering piping from breakage.

Fig 1: Identifying Matching Mark On Propeller Shaft Flange Yoke And Final Drive Companion Flange
Courtesy of NISSAN MOTOR CO., U.S.A.
Wrap transmission interference area (A) with shop cloth or equivalent to protect propeller shaft from breakage.

Fig 2: Identifying Transmission Interference Area
Courtesy of NISSAN MOTOR CO., U.S.A.
Never reuse O-ring.
Apply multi-purpose grease onto O-ring.