Diagnosis Procedure
- CHECK TRANSMISSION RANGE SWITCH
Check DTC for BCM.
Refer to "DTC INDEX ".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace the malfunctioning parts.
- CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer.
Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace the malfunctioning parts.
- CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter).
Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 4.
NO: Repair or replace the malfunctioning parts.
- CHECK DOOR SWITCH
Check door switch (driver side).
Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 5.
NO: Repair or replace the malfunctioning parts.
- CHECK INSIDE KEY ANTENNA
Check inside key antenna.
Refer to "DTC LOGIC " (instrument center).
Refer to "DTC LOGIC " (console).
Refer to "DTC LOGIC " (luggage room).
Is the inspection result normal?
YES: GO TO 6.
NO: Repair or replace the malfunctioning parts.
- CHECK COMBINATION METER DISPLAY
Check combination meter display.
Refer to "COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 7.
NO: Repair or replace the malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".
NO: GO TO 1.