Diagnosis Procedure

Check "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".

Refer to "INTELLIGENT KEY : CONSULT-III FUNCTION (BCM - INTELLIGENT KEY) (WITH AUTOMATIC BACK DOOR) ".

Is the inspection result normal? 

YES: GO TO 2.

NO: Set "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".

Check door switch.

Refer to "COMPONENT FUNCTION CHECK ".

Is the inspection result normal? 

YES: GO TO 3.

NO: Repair or replace the malfunctioning parts.

Check inside key antenna.

Refer to "DTC LOGIC " (instrument center).

Refer to "DTC LOGIC " (console).

Refer to "DTC LOGIC " (luggage room).

Is the inspection result normal? 

YES: GO TO 4.

NO: Repair or replace the malfunctioning parts.

Check unlock sensor.

Refer to "COMPONENT FUNCTION CHECK ".

Is the inspection result normal? 

YES: GO TO 5.

NO: Repair or replace the malfunctioning parts.

Confirm the operation again.

Is the result normal? 

YES: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".

NO: GO TO  1.