Diagnosis Procedure
- CHECK POWER SUPPLY AND GROUND CIRCUIT
Check automatic back door control unit power supply and ground circuit.
Refer to "AUTOMATIC BACK DOOR CONTROL UNIT : DIAGNOSIS PROCEDURE ".
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace the malfunctioning parts.
- CHECK TOUCH SENSOR
Check touch sensor.
Refer to "RH : COMPONENT FUNCTION CHECK ".
Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace the malfunctioning parts.
- REPLACE AUTOMATIC BACK DOOR CONTROL UNIT
- Replace automatic back door control unit. Refer to "AUTOMATIC BACK DOOR CONTROL UNIT : DIAGNOSIS PROCEDURE ".
- Confirm the operation after replacement.
Is the result normal?
YES: INSPECTION END
NO: Check intermittent incident. Refer to "INTERMITTENT INCIDENT ".