LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> FX35 RWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door & Lock - With Automatic Back Door -- FX35/FX50 >> DTC/Circuit Diagnosis >> Automatic Back Door Main Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Select "AUTOMATIC BACK DOOR CONTROL UNIT" using CONSULT-III.
    2. Select "MAIN SW" in "DATA MONITOR" mode.
    3. Check that the function operates normally according to the following conditions.
      MONITOR ITEMS CONDITION CHART

      Monitor item Condition Status
      MAIN SW Automatic back door main switch ON ON
      OFF OFF

      Is the inspection result normal? 

      YES: Automatic back door main switch is OK.

      NO: Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals