Active Test
CAUTION:
Start the engine when using "ACTIVE TEST".
ACTIVE TEST CHART
| Test item | Operation Item | Description |
|---|---|---|
| LOW BEAM TEST RIGHT | Origin Fast | Swivels the right headlamp to the swivel angle 0° in the normal speed. |
| Peak Fast | Swivels the right headlamp to the swivel angle approximately 15° in the normal speed. | |
| Origin Slow | Swivels the right headlamp to the swivel angle 0° in the speed at the initialization. | |
| Peak Slow | Swivels the right headlamp to the swivel angle approximately 15° in the speed at the initialization. | |
| LOW BEAM TEST LEFT | Origin Fast | Swivels the left headlamp to the swivel angle 0° in the normal speed. |
| Peak Fast | Swivels the left headlamp to the swivel angle approximately 17° in the normal speed. | |
| Origin Slow | Swivels the left headlamp to the swivel angle 0° in the speed at the initialization. | |
| Peak Slow | Swivels the left headlamp to the swivel angle approximately 17° in the speed at the initialization. | |
| LEVELIZER TEST | Origin | Changes the aiming motor drive signal to approximately 70% of the battery voltage. Moves the headlamp upward and downward. |
| Peak | Changes the aiming motor drive signal to approximately 15% of the battery voltage. Moves the headlamp upward and downward. |
NOTE:
"Fast" operation speed is as three times fast as "Slow".