LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> FX35 RWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Exterior Lighting System -- FX35/FX50 >> DTC/Circuit Diagnosis >> Headlamp Aiming Control System (Manual) >> Component Inspection

Component Inspection

  1. CHECK HEADLAMP AIMING SWITCH
    1. Remove the headlamp aiming switch.
    2. Check the resistance among each headlamp aiming switch terminal.
      RESISTANCE REFERENCE CHART

      Headlamp aiming switch Condition Resistance (Approx.)
      Terminal Switch position
      1 2 0 A: 910 Ω
      1 B: 680 Ω
      2 C: 510 Ω
      3 D: 390 Ω
      3 - E: 390 Ω
      Fig 1: Checking Resistance Between Headlamp Aiming Switch Terminal
      G05372340Courtesy of NISSAN MOTOR CO., U.S.A.

      Is the measurement value normal? 

      YES: Headlamp aiming switch is normal.

      NO: Replace the headlamp aiming switch.

scientia non olet · About LEMON Manuals