Component Inspection
- CHECK HEIGHT SENSOR
- Remove the height sensor (the height sensor connector is connected).
- Start the engine.
- Turn the light switch 2ND.
- Select "HI SEN OTP RR" of AFS data monitor item.
- With moving the sensor lever, check the monitor status.MONITOR ITEM CHART
Monitor item Condition Monitor status [Standard value (Approx.)] HI SEN OTP RR Sensor lever position Contact with stopper 0.9 V Moving between two positions Smooth movement 90° from stopper 4.5 V Is the output value normal?
YES: Height sensor is normal.
NO: Replace the height sensor.