Component Inspection

CHECK DOOR KEY CYLINDER SWITCH

Turn ignition switch OFF.
Disconnect front door lock assembly (driver side) (key cylinder switch) terminals.

Check front door lock assembly (driver side) (key cylinder switch) terminals.

CONTINUITY REFERENCE CHART

Terminal		Key position	Continuity
Front door lock assembly (driver side) connector		Key position	Continuity
5	4	Unlock	Existed
5		Neutral/Lock	Not existed
6		Lock	Existed
6		Neutral/Unlock	Not existed

Is the inspection result normal?

YES: Door key cylinder switch is OK.

NO: Replace front door lock assembly (driver side). Refer to "DOOR ASSEMBLY : REMOVAL AND INSTALLATION ".