LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2011 >> EX35 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter, Warning Lamp & Indicator >> DTC/Circuit Diagnosis >> Trip A/B Reset Switch Signal Circuit >> Component Inspection

Component Inspection

  1. CHECK TRIP A/B RESET SWITCH UNIT
    1. Turn ignition switch OFF.
    2. Disconnect the trip A/B reset switch connector.
    3. Check continuity between the trip A/B reset switch connector terminals.
    CONTINUITY SPECIFICATION

    Trip A/B reset switch Operation and status Continuity
    Terminal
    1 2 Press trip A/B reset switch Existed
    Other than the above Not existed

    Is inspection result normal? 

    YES: INSPECTION END

    NO: Replace trip A/B reset switch.

scientia non olet · About LEMON Manuals